Branch:
{{vm.headerLinks.defaultWarehouse.linkText}}Pending Approvals:
{{vm.headerLinks.pendingApproval.linkText.split(" ")[0]}}Open Orders:
{{vm.headerLinks.openOrders.linkText.split(" ")[0]}}Product Lists:
{{vm.headerLinks.productList.linkText.split(" ")[0]}}
ACTREG ADA-130 Rack and Pinion Actuator, #130 Actuator, Double Acting Valve
Valve Actuators
674443
MFG #: ADA-130
Requires Quote
- Actuator Size: #130
- Additional Information: 17 mm Stem
- Manufacturer: ACTREG
- Material: Aluminum
- Output Torque: 118
- Series: ADA Series
- Temperature Rating: -30 to 100
- Travel Adjustment: +/-5
- Valve Design: Double Acting
The pneumatic actuators ACTREG use a rack and pinion sliding system that creates a linear torque with a quarter turn operation.
- Features
- Rack and pinion design
- Anti-friction sliding bearings
- Long life without maintenance
- Fully traceability of critical components (body, stem, pistons, end caps)
- Anti-blow up stem
- Position indicator can be used also to operate mechanical limit switches or proximity detectors
- ACTREG rack and pinion actuators are provided with bi-directional pinion travel stops
- Side located stops allow a full +/-5 deg travel adjustment between 85 deg and 95 deg
- These travel stops are designed to absorb the maximum rated torque of the actuator and the maximum impact loads associated with recommended travel speed
- Adjustment of the anti-clockwise and clockwise rotation limits is accomplished by unscrewing the locking nuts, turning the respective left and right stop studs to reduce or increase the travel angle and screwing the locking nuts
- STANDARD_APPROVALS: CE Ex II2GDc