Branch:
{{vm.headerLinks.defaultWarehouse.linkText}}Pending Approvals:
{{vm.headerLinks.pendingApproval.linkText.split(" ")[0]}}Open Orders:
{{vm.headerLinks.openOrders.linkText.split(" ")[0]}}Product Lists:
{{vm.headerLinks.productList.linkText.split(" ")[0]}}
Powell Valves GA08SA58GB_1IN Gate Valve, 1 in, Socket Weld, Steel
Other Gate Valves
129957
MFG #: GA08SA58GB_1IN
116.00000
/ ea
- Actuator Type: Manual
- Additional Information: 4.9 in Dia Handwheel
- Body Material: Forged Carbon Steel, Steel
- Connection Type: Socket Weld
- Flow Coefficient (Cv): 30
- Handle Material: Iron/Steel, Malleable Iron/Steel
- Inlet to Outlet Length: 4.37
- Manufacturer: Powell Valves
- Material Standard: ASTM A105, A182, A193, A194, ASTM A105, ASTM A182 Grade F6a
- Nominal Size: 1, 1 in
- Operator Type: Handwheel
- Packing Material: Graphite
- Pressure Class: 800, Class 800
- Series: GA08 Series
- Softgoods Material: Graphite
- Stem Material: Stainless Steel
- Top to Inlet Center: 7.3
- Trim Material: Carbon Steel Bonnet
- Gland Material: 420 Stainless Steel
- Item Name: Gate Valve
- Opening Size: 0.71 in
- Series/Model: Series GA08
- Type: Standard Port
- Width: 4.37 in
Powell Valves Gate Valve, Series: GA08 Series, 1 in Nominal, Socket Weld Connection, 800 lb Pressure Class, Manual Actuator, 4.37 in Inlet to Outlet Length, 7.3 in Top to Inlet Center, Steel Body, Stainless Steel Stem, Graphite Packing, Iron/Steel Handle, Graphite Softgoods, Handwheel Operator, 30 Cv Flow Coefficient (Cv), ASTM A105, A182, A193, A194 Material Standard, Additional Information: 4.9 in Dia Handwheel
- Features
- Wedges are accurately guided thru the entire stroke
- Standard trim is satellite faced seat rings, 13% chrome wedge seat surfaces and 13% chrome stem (API trim 8)
- Seat faces lapped for smooth finish and superior sealing
- Stems are non-rotating with surface finish to maximize packing seal for low fugitive emissions
- Each valve is shell, seat and backseat pressure tested per industry standard API 598
- Gland is two-piece gland/gland flange design for optimal alignment and uniform packing compression
- End flanges have the following raised faces per ASME B16.5
- STANDARD_APPROVALS: API 598/602|ASME B16.11/B16.34/B16.5