3 TITAN CV41-DI-B-S-1-S DUCTILE IRON 150# DUAL DISC WAFER TYPE CHECK VALVE, BRZ DISC, SS SHAFT AND SPRING, BUNA SEAT

Other Check Valves
483279 MFG #: CV41-DI-B-S-1-S-3
Requires Quote

3 TITAN CV41-DI-B-S-1-S DUCTILE IRON 150# DUAL DISC WAFER TYPE CHECK VALVE, BRZ DISC, SS SHAFT AND SPRING, BUNA SEAT
  • Body Material: Iron
  • Connection Type: Flanged
  • Dimensions: 5-3/4 in H
  • Disc Material: Bronze
  • Finish: Epoxy Painted
  • Inlet to Outlet Length: 2-1/4
  • Manufacturer: TITAN
  • Nominal Size: 3
  • Pressure Class: 150
  • Seat Material: Buna-N
  • Series: CV41-DI Series
  • Temperature Rating: -30 to 300
  • Trim Material: 300 Stainless Steel

3 TITAN CV41-DI-B-S-1-S DUCTILE IRON 150# DUAL DISC WAFER TYPE CHECK VALVE, BRZ DISC, SS SHAFT AND SPRING, BUNA SEAT

QTY
Add to Wishlist
  • Features
  • Cost efficient design - low weight and short laying length produce savings in initial cost, spacer requirements and installation when compared to full body, swing-type check valves
  • Minimal head loss contour of body provides a short and straight flow path that generates very little turbulence
  • Additionally, these spring loaded discs are designed with very low cracking pressure which reduces the amount of energy required to open the valve
  • Quick closure to reduce water hammer shut-off is achieved via the fully automatic, spring assisted discs that close near zero flow velocity
  • The lightweight, split disc design creates a positive shut-off prior to flow reversal and helps to keep slamming and surges to a minimum
  • Ductile iron body - ductile iron body maintains the anti-corrosive properties of cast iron while achieving a yield strength comparable to carbon steel
  • Ductile iron also offers higher pressure/temperature ratings than cast iron
  • Resilient soft seats - resilient soft seats (EPDM, FKM or Buna) ensure a bubble-tight seal that meets or exceeds API 598 test requirements
  • STANDARD_APPROVALS: API 598|ASME 16.34|ASME 16.5|ASME B16.42|ASME/API 594|ASTM A536|FM Approved