Branch:
{{vm.headerLinks.defaultWarehouse.linkText}}Pending Approvals:
{{vm.headerLinks.pendingApproval.linkText.split(" ")[0]}}Open Orders:
{{vm.headerLinks.openOrders.linkText.split(" ")[0]}}Product Lists:
{{vm.headerLinks.productList.linkText.split(" ")[0]}}
Bradford White® CEHD50243CF Electric Water Heater, 50 gal, 24 kW, 3 ph, 208 V
- Amperage Rating: 66.7, 66.7 A Full Load
- Connection Size: 1-1/2
- Connection Type: NPT
- Dimensions: 24 in Dia x 66-3/4 in H
- Flow Rate: 248
- Manufacturer: Bradford White®
- Material: Steel
- Mounting Type: Floor
- Number of Elements: 6
- Phase: 3
- Power Rating: 24, 24 kW
- Recovery Rate: 248, 71 - 248 gph
- Temperature Rating: 180, 40 - 140 deg F
- Thermostat Type: Immersion
- Voltage Rating: 208, 208 V
- Heating Capacity: 50 gal
- Heating Element: 6
- Item Name: Electric Water Heater
- Sub Brand: ElectriFLEX HD™
- Type: Commercial
- Water Connection: 1-1/2 in NPT
ElectriFLEX HD™ models easily convert to your exact requirements. They’re available in 50, 80 and 119 gal capacities and 12 different wattages so professionals have the solutions to any challenge. Just three ElectriFLEX HD™ models in each gallon capacity will cover all kW configurations and thereby reduce needed inventory. ElectriFLEX HD™ models are perfect for large restaurants, health clubs, stadiums, schools, and just about anywhere large volumes of hot water are required.
MANUFACTURER DISCLAIMERS:
-
Bradford White manufactures products for installation by qualified professional contractors with applicable state and local licensing. Bradford White Corporation assumes no liability for products installed outside of the installation recommendations in the product’s official installation and operation instruction manual. Bradford White only assumes responsibility for verified manufacturing defects as stated in the applicable Bradford White limited warranty for your product.
-
It is the purchaser’s responsibility to purchase products that meet state and local codes for the intended installation site of the Bradford White product.
- Features
- Immersion thermostats - designed to provide outlet water at a thermostatically controlled temperature greater than 180 deg F
- Conversion kits design certified by ETL for field conversion, conversion kits are available to convert any one model to a variety of voltages and kW inputs
- Insulation system - 3 in non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity
- Factory installed Hydrojet® sediment reduction system sediment build-up reducing device that also increases first hour delivery of hot water while minimizing temperature build-up in tank
- Vitraglas® lining, an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
- Water connections, 1-1/2 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections
- Elements screw-in style low watt density INCOLOY® sheathed elements standard, these elements are durable and resistant to lime build-up
- Two protective magnesium anode rods, provide added protection against corrosion for long term, trouble-free service
- Hand hole cleanout allows inspection of tank interior and facilitates the removal of sediment deposits
- Completely pre-wired with pressure lug terminal block eliminating need for splicing or taping of wires
- STANDARD_APPROVALS: cETLus Listed|CSA Certified|NSF Certified
- APPLICATION: For commercial