Branch:
{{vm.headerLinks.defaultWarehouse.linkText}}Pending Approvals:
{{vm.headerLinks.pendingApproval.linkText.split(" ")[0]}}Open Orders:
{{vm.headerLinks.openOrders.linkText.split(" ")[0]}}Product Lists:
{{vm.headerLinks.productList.linkText.split(" ")[0]}}
BRADFORD WHITE LE16U3-1 6 GALLON LIGHT DUTY COMMERCIAL ELECTRIC WATER HEATER 120V 1.5KW
- Connection Size: 3/4
- Connection Type: NPT
- Dimensions: 16-1/2 in H x 14 in W
- Element Wattage: 1500
- Manufacturer: Bradford White®
- Material: Steel
- Mounting Type: Surface
- Number of Elements: 1
- Phase: 1
- Power Rating: 1.5 kW
- Recovery Rate: 6, 6 gph
- Temperature Rating: 1600 deg F
- Voltage Rating: 120, 120 V
- Wire Size: 12
- Finish: Vitraglas
- Heating Capacity: 6 gal
- Heating Element: Magnesium Anode Rod
- Item Name: Electric Water Heater
- Mounting: Surface
- Sub Brand: ElectriFLEX LD™
- Type: Commercial, Light Duty, Utility
- Water Connection: 3/4 in NPT
ElectriFLEX LD™ models are offered in Upright, Utility, Lowboy and Wall Hung configurations so you’ll always have the perfect solution for your light duty applications. These space saving, high output water heaters are perfect for commercial installations such as strip malls, service stations, and fast food restaurants. Light duty model capacities range from 6 to 119 gal.
MANUFACTURER DISCLAIMERS:
-
Bradford White manufactures products for installation by qualified professional contractors with applicable state and local licensing. Bradford White Corporation assumes no liability for products installed outside of the installation recommendations in the product’s official installation and operation instruction manual. Bradford White only assumes responsibility for verified manufacturing defects as stated in the applicable Bradford White limited warranty for your product.
-
It is the purchaser’s responsibility to purchase products that meet state and local codes for the intended installation site of the Bradford White product.
- Features
- Fast acting surface-mount thermostats with a maximum setpoint of 175 deg F and a high-limit energy cut-off (manual reset) for safety
- Transfers heat directly and efficiently to the water, screw-in style element
- An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F
- 1 in non-CFC foam insulation covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity
- 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, located on the side for easier installation
- Protective magnesium anode rod - provides added protection against corrosion for long term, trouble-free service
- Heavy gauge steel automatically formed, rolled and welded
- Temperature and pressure relief valve installed
- STANDARD_APPROVALS: cETLus Listed|CSA Certified