Branch:
{{vm.headerLinks.defaultWarehouse.linkText}}Pending Approvals:
{{vm.headerLinks.pendingApproval.linkText.split(" ")[0]}}Open Orders:
{{vm.headerLinks.openOrders.linkText.split(" ")[0]}}Product Lists:
{{vm.headerLinks.productList.linkText.split(" ")[0]}}
Zoeller® Flow-Mate 137-0001 Sump Pump, 115 V, 10.7 A, 1/2 hp, 93 gpm, 26 ft Max Feet of Head, Cast Iron
- Amperage Rating: 10.7, 10.7 A
- Bearing Material: Cast Iron
- Connection Type: NPT
- Cord Length: 10
- Dimensions: 11-3/4 in L x 11-3/4 in W x 13 in H
- Discharge Size: 1-1/2 in NPT
- Finish/Color: Epoxy Powder Coated
- Flow Rate: 93, 93 gpm
- Frequency Rating: 60, 60 Hz
- Height: 12-3/4 in
- Housing Material: Cast Iron
- HP Rating: 0.5 hp, 1/2
- Impeller Material: Cast Iron, Cast Iron Vortex
- Item Name: Effluent Pump
- Length: 12-1/4 in
- Manufacturer: Zoeller®
- Material: Cast Iron
- Maximum Feet of Head: 26
- Maximum Head: 26 ft
- Model: M137
- Phase: 1
- RPM Rating: 1725 rpm
- Series: Flow-Mate
- Series/Model: Model M137/Flow-Mate
- Shaft Material: Cold Rolled Steel
- Size: 1-1/2 in Outlet
- Speed Rating: 1725
- Switch Type: 2-Pole Float Operated Mechanical
- Temperature Rating: 130, 130 deg F
- Type: Automatic
- Voltage Rating: 115, 115 V
- Width: 10.93 in
The "Flow-Mate" series of submersible pumps is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance. This attention to detail is an inherent feature of every pump in this series, making it one of the most reliable in the industry.
- Features
- Corrosion-resistant powder-coated epoxy finish
- Durable cast iron construction - switch case motor and pump housing, base and impeller
- Float operated two pole mechanical switch
- No sheet metal parts to rust or corrode
- Oil filled and hermetically sealed automatic reset thermal overload protected (1 Ph) motor
- Upper and lower sleeve bearings running in bath of oil
- Carbon and ceramic shaft seal
- Stainless steel screws, bolts, guard, handle, arm and seal assembly
- Maximum temperature for effluent or dewatering 130 deg F (extra duty 140 deg F)
- Passes 5/8 in spherical solids
- No screens to clog
- 10 in auto on point, 2-3/4 auto off point
- Non-clogging vortex impeller
- Auto reset thermal overload motor protection
- Class A or B insulation
- STANDARD_APPROVALS: CSA Certified, UL Listed
- APPLICATION: For heavy duty effluent applications