Branch:
{{vm.headerLinks.defaultWarehouse.linkText}}Pending Approvals:
{{vm.headerLinks.pendingApproval.linkText.split(" ")[0]}}Open Orders:
{{vm.headerLinks.openOrders.linkText.split(" ")[0]}}Product Lists:
{{vm.headerLinks.productList.linkText.split(" ")[0]}}
Zoeller® 98-0001 Sump Pump, 115 VAC, 9.4 A, 1/2 hp, 72 gpm, 23 ft Max Feet of Head, Cast Iron
Sump Pumps
360603
MFG #: 98-0001
455.00000
/ ea
- Amperage Rating: 9.4, 9.4 A
- Bearing Material: Cast Iron
- Connection Type: NPT
- Cord Length: 15
- Dimensions: 10-1/8 in L x 7-3/8 in W x 12-1/16 in H
- Discharge Size: 1/2 in NPT
- Finish/Color: Epoxy Powder Coated
- Flow Rate: 72, 73 gpm
- Frequency Rating: 60, 60 Hz
- Height: 12-1/16 in
- Housing Material: Cast Iron
- HP Rating: 0.5 hp, 1/2
- Impeller Material: Engineered Plastic
- Item Name: Effluent/Sump Pump
- Length: 10-1/8 in
- Manufacturer: Zoeller®
- Material: Cast Iron
- Maximum Feet of Head: 23
- Maximum Head: 23 ft
- Model: M98
- Phase: 1
- RPM Rating: 1725 rpm
- Series/Model: Series 98/Flow-Mate
- Shaft Material: Cold Rolled Steel
- Size: 1-1/2 in Outlet
- Speed Rating: 1725
- Switch Type: 2-Pole Float Operated Mechanical
- Temperature Rating: 130, 130 deg F
- Type: Automatic, Submersible
- Voltage Rating: 115, 115 V
- Width: 10-1/8 in
Zoeller® Sump Pump, Model: M98, 115 VAC, 9.4 A, 60 Hz, 1/2 hp, 1725 rpm, 72 gpm Flow Rate, 1 ph 1/2 in NPT Discharge, 15 ft Cord Length, 72 gal at 5 ft, 61 gal at 10 ft, 45 gal at 15 ft, 25 gal at 20 ft Capacity, Maximum Feet of Head: 23 ft, 130 deg F, Engineered Plastic Impeller, Cast Iron, 10-1/8 in L x 7-3/8 in W x 12-1/16 in H
- Features
- Corrosion-resistant powder-coated epoxy finish
- Durable, cast iron construction
- Cast iron switch case, motor, pump housing and base
- No sheet metal parts to rust or corrode
- All castings are cast iron class 25-30 25000# tensile strength
- Stainless steel screws, guard, handle, arm and seal assembly
- Float operated two pole mechanical switch
- Permanent split capacitor motor, oil-filled and hermetically-sealed, automatic reset thermal overload protection
- Bearings upper and lower oil-fed cast iron
- Carbon and ceramic shaft seal
- Entire unit pressure-tested after assembly
- Watertight, neoprene square ring between motor and pump housing
- Passes 1/2 in spherical solids
- No screens to clog
- 9-1/2 in on-point
- 3 in off-point
- STANDARD_APPROVALS: C/US CSA C22.2 Number 108, UL 778
- APPLICATION: For septic tanks, low pressure pipe (LPP) and enhanced flow STEP systems