Branch:
{{vm.headerLinks.defaultWarehouse.linkText}}Pending Approvals:
{{vm.headerLinks.pendingApproval.linkText.split(" ")[0]}}Open Orders:
{{vm.headerLinks.openOrders.linkText.split(" ")[0]}}Product Lists:
{{vm.headerLinks.productList.linkText.split(" ")[0]}}
Liberty Pumps® ELV290 Elevator Sump Pump With OilTector Control, 115 V, 3/4 hp, 50 ft Max Head, Clamp Mounting
Combo Sump Pump & Backup Systems
284747
MFG #: ELV290
3470.00000
/ ea
- Additional Information: FNPT Discharge Connection
- Cord Length: 25
- Dimensions: 10 in H x 7-1/2 in W x 5-1/2 in D
- Discharge Size: 1-1/2
- Enclosure Type: NEAM 4X
- Float Type: Mechanical
- Flow Rate: 48 gpm, 77
- Frequency Rating: 60, 60 Hz
- HP Rating: 0.75 hp, 3/4
- Manufacturer: Liberty Pumps®
- Material: Cast Iron
- Maximum Head: 47 ft, 50
- Mounting Type: Clamp
- Series: ELV Series
- Voltage Rating: 115, 115 V
- Amperage Rating: 10.4 A Full Load
- Bearing Material: Stainless Steel
- Connection Type: NPT
- Enclosure: NEMA 1
- Height: 13 in
- Housing Material: Cast Iron
- Impeller Material: Engineered Polymer
- Item Name: Elevator Sump Pump with Oil Sensor
- Mounting: Easy Clamp
- Phase: 1
- RPM Rating: 3450 rpm
- Series/Model: Series ELV
- Shaft Material: Stainless Steel
- Size: 1-1/2 in Discharge
- Switch Type: Float Operated Mechanical
- Temperature Rating: 140 deg F, 248 deg F Thermal Overload
- Type: Submersible
The ELV Series sump pumps are designed and approved for safe operation of pumping, alarming and monitoring of elevator sump pits, transformer vaults and other applications where oil and water must be detected. The OilTector® system will activate the pump to remove water from elevator pits in accordance with ASME A17.1 and will provide pumping of only water - even if an oil condition is detected. The OilTector® cycles the pump only in the water range. Oil and other harmful floating substances are not discharged into the environment. An alarm is activated in the event of a high water condition or high oil condition.
- Features
- Oil-resistant SJEOOW cord, 25 ft standard length
- Easy clamp mounted pre-set level sensor holder
- No field adjustments required, OilTector® will turn pumps ON and OFF, sound the high water alarm and high oil alarm with one easy installation
- See through door, separate pump and control circuits - NEMA 4X enclosure
- Plug-in ready pump cord and control panel cord for quick and easy installation
- Remote alarm with auxiliary contacts for connection to building automation or SCADA system, 24 VAC/VDC, 500 mA max switching
- Power ON, pump run, high water and high oil lights
- STANDARD_APPROVALS: ASME A17.1|cCSAus Certified|cULus Listed|SSPMA Certified