Cleanfit 70887 Tape, 0.0035 in Thick, 1 in W, 1429 in L, Blue, PTFE, 0.8 g/cc Density

Thread Sealant Tapes
242880 MFG #: 70887
11.00000 / ea

  • Color: Blue
  • Density: 0.8, 0.8 g/cu-cm
  • Length: 1429, 1429 in
  • Manufacturer: Cleanfit, Cleanfit Blue Monster®
  • Material: PTFE
  • Temperature Rating: -400 to 500, -450 to 500 deg F
  • Tensile Strength: 115 N/sq-mm, 15
  • Thickness: 0.0035, 0.0035 in
  • Width: 1, 1 in
  • Finish/Color: Blue
  • Item Name: PTFE Thread Seal Tape
  • Type: Professional Grade

Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll. That's 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Now available in a smaller roll, Mini-Monster PTFE thread sealant tape. Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.

QTY
  • Features
  • Videos
  • Compatible with a broad range of gases and liquids
  • Compatible with a broad range of piping materials will not harden or crack on the joints
  • Effective across a broad range of temperatures and pressures
  • Acts as a thread lubricant and anti-seize
  • Prevents electrolytic corrosion of threads
  • No curing time
  • Unlimited shelf life
  • Non-flammable
  • 99.6% PTFE less than 0.4% composition
  • Greater than 100% elongation
  • Mill-Rose blue monster thread sealing tape has been used to seal fittings carrying water and oil at pressures up to 10000 lb/sq-in or 69000kPa
  • Temperature range - 450 to 500 deg F PTFE is completely stable up to 500 deg F
  • Decomposition is slow upto 750 deg F
  • Although decomposition will occur on contact with naked flames
  • Note-pressure ratings are relative to the quality and torque of the fittings and the amount of tape used
  • STANDARD_APPROVALS: UL Listed
  • APPLICATION: For use on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more